How To Fix The 0x80070570 Error

When you delete a file or folder from your computer or copy files in a USB drive, you may receive the error message: “Error 0x80070570: The file or directory is corrupt and unreadable”.

Reasons Of Error Code 0x80070570:

  • Corrupted and unreadable file or directory.
  • Installation of a Windows update.
0x80070570

This error prevents you from performing many tasks. This error is usually caused by an unknown system problem, which may be a hardware or software problem.

This should be resolved quickly before it causes other more serious problems.

Solutions For Corrupted And Unreadable File or Directory

Method 1: Scan for viruses

virus scan

If you have failed to delete files from your computer and you encounter the error, it is possible that the system settings have been changed by virus or malware to hack, delete, modify, damage files and system parameters, data, etc.

When the system becomes unable to access data properly, you should be aware of spending a few minutes scanning and removing viruses.

To scan and remove viruses, you can activate the firewall or install other antivirus programs. If you have installed them on your PC, you must update them to have the latest version and activate real-time protection.

Method 2: Check the drivers and install the driver updates

The drivers play an important role in the functioning of the system that is why you must guarantee that the drivers are installed correctly and up to date. These are the only way that correctly translates and transmits information between the system and the software.

0x80070570
  • Open the Device Manager. Right-click on My Computer and select “Clean“, then click on Device Manager in the left part of the window that opens.
  • Search the devices listed one after the other and identify the devices that are marked with a yellow exclamation mark.
  • Right-click on the device with a driver problem and choose Update Driver.

Everyone knows that the files and data stored on the hard drive are actually messed up, because the applications or data on the hard drive are often accessed, deleted, added, etc.

Defragmenting the hard drive improves performance and fixes related problems.

  • Open the Control Panel and click on System and Security where you can see the “Defragment your hard drive” option under Administrative Tools.
  • Click on “Defragment and optimize your readers” to open the “Optimize readers” window.
  • Select the drives and click the Scan button, and it will start to check if the drive should be defragmented.
  • When the scan finishes, click on the Defragment Disk button. Click the box once the process is complete.

Method 3 – Check your hard drive for errors

If you are experiencing error 0x80070570 in Windows 10, the problem could be related to corrupted files on your hard drive. To fix the problem, just check your hard drive for errors by doing the following:

  • Open your file explorer, right-click on the partition you want to scan, then choose Properties from the menu.
  • Click the Tools tab and click the Check button.
  • Check Automatically fix system errors and click Start.
  • Wait a few moments while Windows scans your hard drive. Once the scanning process is complete, do the same for the other drives on your PC.
0x80070570

If you need to perform a more detailed analysis, we recommend that you use the chkdsk command. To do this, follow these steps:

Press Windows key + X to open the menu. From the list choose Command Prompt (Admin).

When the command prompt opens, type chkdsk / f X: and press Enter to run the command. Keep in mind that you must replace X with the letter that corresponds to your reader.

Chkdsk scan will start and analyze the selected partition. Keep in mind that chkdsk will perform a very detailed scan, which can take around 10 minutes or more.

Once the scan finishes, you must repeat the same operation for the other drives on your computer. If this process seems complicated, you can always check the status of your hard drive using another solution.

0x80070570

Solution For A New Installation Of Windows:

Method 1: Retry the installation (error 0x80070570)

If you encounter the error “0x80070570” during the installation of windows, press OK and return to the previous window, resume the installation and repeat it without starting the operation of the installation again. Try this like 3-4 times it may have worked for some of you. If the error repeats, you can stop and try this method.

Method 2: Pull your RAM

If you only have one memory module, go to METHOD 3 – but if you have more than one, try drawing one at a time. EG: If you have four DDR2, Pull 1, then test, then pull the other and test, then pull the other and test until it works, if it doesn’t work, put them all back and go to METHOD 3 .

However, you must have a 2GB array at all times. If you have 1 GB sticks, try putting two sticks.

Method 3: Create an account via the command prompt

When the error appears, follow the steps below:

  • Press the SHIFT key and press F10 (SHIFT + F10) to open the command prompt.
  • Type CD C: \ windows \ system32 \ oobe and press Enter (If you are already in C: \ windows \ system32 or if there is an error type CD oobe only).
  • Type msoobe and press Enter.
  • After a Windows account creation wizard should be opened. Follow the on-screen instructions to create a general user account, then restart the system. This should resolve the error.

Method 4: Using MMC – Microsoft Management Console

  • Press SHIFT and press F10 (SHIFT + F10) to open the command prompt.
  • Type MMC
  • Click File and then select Add / Remove Snap-ins
  • Select on Computer Management >> Add >>Local Computer.
  • Once done, click on Finish and then select OK.
  • Click on Computer Management.
  • Select system tools.
  • Click local users and groups.
  • Select users.
  • Double click on Administrator.
  • Clear the Account is a disabled checkbox and select Ok.
  • Right-click on Administrator and select Set Password.
  • Choose a password you want.
  • Now restart your computer this should resolve the problem.

Method 5: Activating the default administrator account

If the previous methods did not solve your problem or if you cannot access the Management of local user groups in method 2.

“Local users and groups” is not available on some versions of Windows, especially the Home version of Windows 7.

The steps below are therefore another way to activate the default administrator account.

  • Press SHIFT and press F10 (SHIFT + F10) to open the command prompt.
  • Type net user administrator / active: yes and press Enter.
  • Type net user administrator password / active: yes and press Enter (Note: replace the ”  password  ” with the password you want to set for the default administrator account).
  • Restart your computer.
0x80070570

I hope this would help you to fix the error 0x80070570. we have listed you with 8 working methods. Sometimes you may not get it at the first try, so don’t lose your patience and proceed with the further methods too.

If you have any doubts or any better suggestions, please do share it with us.

Leave a Reply